Values

  • Gives Swiss machines the ability to adjust the missing y-axis on the sub spindle
  • Simple to align with the Perfect Zero ® cameras
  • Decreases setup time compared to trial and error with the sub block tool holder
  • Coolant through 1/8" NPT side connection
  • Common ER16 Taper and M style nut threads
sleeve to set y axis on swiss machines dimensions

The Solution

This collet sleeve has been designed to give a very adjustable way to set the Y axis on on Swiss machines, specifically those without a sub spindle Y-axis. Combined with your Perfect Zero camera system, this tool allows to positionally align collet clamped tools. Holder has a collet holding taper that is .008" off center. Loosen the set screws and rotate the holder until the Y axis is perfectly center. Tighten set screws. Adjust the X axis to centerline and make offset in your machine.

clock Decreased set up time
scale money Affordable to buy and maintain
efficiency graph Improve efficiency